K145

K145 is a M5Stack Tab5 IoT development kit (ESP32-P4). The Tab5 is a highly expandable, portable smart IoT terminal designed for developers, integrating a dual-core architecture and rich hardware resources. It is built around the ESP32-P4 SoC based on the RISC-V architecture, featuring 16MB flash and 32MB PSRAM for high-performance application development. The Tab5 is ideal for smart home control, remote monitoring, industrial automation, IoT prototyping, and education. It provides a full-featured, high-performance, and easily expandable platform for modern IoT and edge computing solutions.

• ESP32-P4 dual-core MCU, ESP32-C6 wireless module and 2.4GHz Wi‑Fi 6
• Built‑in 3D antenna & MMCX external antenna port, 5inch IPS TFT display, resolution 1280×720(720P)
• SC2356 2MP camera, USB ports (USB Type-A Host + USB Type-C OTG)
• RS485 industrial interface, HY2.0-4P & M5-Bus expansion, microSD card slot, Stamp expansion pads
• ES8388 audio codec and ES7210 AEC dual microphones
• 1W speaker + 3.5mm headphone jack, BMI270 6-axis sensor
• RX8130CE real-time clock, Reset/Boot & Power keys, removable NP-F550 battery
• Standard 1/4″-20 tripod-mount nut
• IP2326 charging management chip
• Development platform: UiFlow2, Arduino IDE, ESP-IDF, PlatformIO

Contents

1 x Tab5 Kit, 1 x 1.25-6P single-ended terminal cable, 1 x NP-F550 2000mAh removable battery (optional).